background image

4

1. Safety

Safety Information

Operating Warnings 

WARNING:

 This product can expose you to chemicals including Methyl Isobutyl Ketone, which is known to 

the State of California to cause cancer and birth defects or other reproductive harm. For more information go 
to http://www.P65Warnings.ca.gov

•  It is the purchaser’s sole responsibility to properly instruct its end users and supervising personnel as to the proper 

operating procedures of all equipment.

•  This equipment is not intended for use by children. Keep children under the age of 13 away from the machine.
•  Do not allow users to wear loose fitting clothing or jewelry while using equipment. It is also recommended to have 

users secure long hair back and up to avoid contact with moving parts.

•  All bystanders must stay clear of all users, moving parts and attached accessories and components while machine 

is in operation.

•  This equipment is categorized as class S per EN ISO 20957-1. As such this equipment is only intended for commer-

cial, institutional and/or studio facilities. It is not intended for home use. Contact with any questions regarding this 
classification.

Access Control

•  Life Fitness recommends that all commercial fitness equipment be used in a supervised area. It is recommended 

that the equipment be located in an access controlled area. Control is the responsibility of the facility owner.

Installation

 

•  Life Fitness requires that all equipment be secured to a solid, level surface to stabilize it and eliminate rocking or 

tipping over.  This must be performed by a licensed contractor. See Bolt to Floor Guidelines for installation proce-
dure.

Proper Usage

•  Do not use any equipment in any way other than designed or intended by the manufacturer. It is imperative that 

equipment is used properly to avoid injury.

•  Injuries may result if exercising improperly or excessively. It is recommended that all individuals consult a physician 

prior to commencing an exercise program. If at any time during exercise you feel faint, dizzy or experience pain, 
STOP EXERCISING and consult your physician.

•  Keep body parts (hands, feet, hair, etc.), clothing and jewelry away from moving parts to avoid injury.

Inspection

•  DO NOT attempt to use or repair any accessory approved for use with the equipment which appears to be dam-

aged or worn.

•  DO NOT use or permit use of any equipment that is damaged and/or has worn or broken parts. For all equipment 

use only replacement parts supplied by .

•  Maintain labels and name plates - Do not remove labels for any reason. They contain important information. If un-

readable or missing, contact customer service for a replacement.

•  Equipment Maintenance - Preventative maintenance is the key to smooth operating equipment as well as to keep 

your liability to a minimum. Equipment needs to be inspected at regular intervals.

•  Ensure that any person(s) making adjustments or performing maintenance or repair of any kind is qualified to do 

so. will provide service and maintenance training at our corporate facility upon request or in the field if proper ar-
rangements are made.

•  Before use, examine all accessories approved for use with the equipment for damage or wear.

Plate Loaded, Free Weight, and Body Weight Systems

•  If the unit is equipped with weight rods, use only Olympic style weight plates (2.0” bore) for training weight. Do not 

use dumbbells or any means other than those stated to increase weight resistance - See machine specific section 
for more information.

•  Always utilize weight plate retention devices such as clamps or pins.  

Содержание S180-ADD







































Отзывы: