Life Fitness FSFLY, Руководство пользователя

Страница: 4 / 15

Fly / Rear Deltoid
1. Assembly Instructions
1. LOOSELY assemble FRONT UPRIGHT (1) to the TOWER (2) using two 3/8 X
92mm BOLTS (3), four 3/8" SAE WASHERS (4), four 3/8" RH WASHERS (5), two
3/8" LOW HT LOCK NUTS (6) and four RH CAPS (7) as shown.
2. LOOSELY assemble the TOP BOOM (8) to the TOWER (2) using two 3/8 X 68mm
BOLTS (9), four 3/8" FLAT WASHERS (46), and two 3/8" LOW HT LOCK NUTS (6)
as shown.
LOOSELY assemble TOP BOOM to the FRONT UPRIGHT (1) using one 3/8 X
102mm BOLT (10), one 3/8 X 92mm BOLT (3), four 3/8" SAE WASHERS (4), four
3/8" RH WASHERS (5), two 3/8" LOW HT LOCK NUTS (6) and four RH CAPS (7).
3. SECURELY tighten all loose frame connections made to this point, then proceed
to snap RH CAPS (7) over the RH WASHERS (5) on all tightened connections.
4. Assemble the BEARING SUPPORT PLATE (11) and BACKING PLATE (51) to the
FRONT UPRIGHT (1) using two 3/8 X 100mm BOLTS (47), four 3/8" SAE WASH-
ERS (4), four 3/8" RH WASHERS (5), two 3/8" LOW HT LOCK NUTS (6) and four
RH CAPS (7) as shown.
NOTE: Tighten bolts until snug. After PIVOT ARMS are assembled and adjusted
these bolts will be tightened.