6.
Press back cover assembly into spring tab holes of console weldment.
Qty
Description
1
Console
1
1
Spring tab holes
2
1
Back cover assembly
3
2
Screw, M4.2 x 0.7 x 19
4
7.
Install back cover assembly with two screws using a Phillips screwdriver.
Install console assembly
1.
Place console assembly into position on frame.
NOTE:
Do not pinch cables while lowering console assembly.
Qty
Description
1
Console assembly
1
1
Frame
2
1
Lower bracket
3
4
Bolt, 0.375-16 x 2.5"
4
4
Locknut, 0.375-16
5
2.
Insert (from underneath) four bolts and lower bracket into frame and console assembly.
3.
Thread four locknuts onto bolts by hand.
4.
Tighten four bolts and locknuts with a 7/32” Allen wrench and a 9/16” open-end wrench.
Page 20 of 29
