Life Fitness Axiom OP-BT, Руководство по сборке

Страница: 22 / 44

18. Thread cable end through the jam nut and into the head plate bayonet. See Cable Handling Guide for details.
Item Description Qty.
1 Cable, 116.3" (2955mm) 1
2 Nut, M16, Hex Jam 1
3 Head Plate Bayonet 1
NOTE: Check proper thread engagement. To do so, attempt to pass a 7mm Allen wrench through the portal in the
head plate bayonet. If it goes through, more threads are needed to meet the minimum requirement.
Correct Depth: Thread engagement exceeds minimum
depth.
Incorrect Depth: Thread engagement not deep
enough.
19. Select either the LBS or KG weight stack label. Remove backing from label and apply to weight stack.
NOTE: One weight stack label sheet, LBS or KG, is used for both weight stacks.
Item Description Qty.
1 Weight Stack Label 1
2 Weight Stack 1
20.
Test the tower assembly.
21.
Route cable out through hole at the bottom of tower side tube. Route cable through the lower pulley assembly.
Page 20 of 40