Life Fitness Axiom OP-BT, Руководство по сборке

Страница: 31 / 44

Install Handle Assembly
1. Slide handle assembly and shaft collar onto the work arm assembly. Tighten set screws in the shaft collar using a
4mm Allen wrench.
NOTE: Make sure set screws face away from the user when shaft collar is installed.
Item Description Qty.
1 Handle Assembly 1
2 Work Arm Assembly 1
3 Shaft Collar 1
Tighten hardware to 8-10 ft-lb (10.8-13.5 Nm).
NOTE: Make sure handle shaft on the handle assembly is aligned between the two bumpers on the work arm
assembly.
Item Description Qty.
1 Handle Shaft 1
2 Bumper 2
2.
Install screws and washers securing the counter weight to the work arm assembly using an 8mm Allen wrench.
Item Description Qty.
1 Counter Weight 1
2 Work Arm Assembly 1
3 Washer, Flat 3/8" 2
4 Screw, M10 x 1.5, 25mm 2
Tighten hardware to 14-16 ft-lb (19-21.7 Nm).
Page 29 of 40