Life Fitness ARC-TB-CS-B1, Руководство по сборке

Страница: 10 / 48

Electrical Power Requirements (Applicable for Units Using External Power Supply)
The units are self powered or can be used with an optional external power supply. The optional external power supply
is required for an attachable TV; no other additional supplies are required.
WARNING: Use only the supplied power brick and line cord. Do not use any modification to connect to a 2-
prong outlet. Product must be connected to a properly rated 3-prong outlet.
Console Supply Voltage Frequency Output Voltage Output Current
Integrity SL 95 - 264 VAC 47 - 63 Hz 24 VDC 5 A
Outlet Voltage Commercial Units Outlet &
Breaker (Amps)
Consumer / Home Units Outlet &
Breaker (Amps)
120 VAC 20 (no more than 10 units per
breaker) 15 (no more than 8 units per
breaker)
230 VAC 12 (no more than 10 units per
breaker) 12 (no more than 8 units per
breaker)
NOTE: Do not modify the plug provided with this product. If the plug does not fit into an available electrical outlet,
have a proper outlet installed by a qualified electrician.
NOTE: Make sure the power brick cord is securely connected to the base unit. A loose connection may result in the
unit not receiving external power.
Install External Power Supply
1. Plug in the power to the external power connector on the front end of the unit.
2.
Tighten the connector to the unit until its securely in place.
3.
Plug the cord into an AC outlet.
Description Qty
1 IR Cable Connector 1
2 External Power for Console Connector 1
3 Coax Cable Connector 1
4 Ethernet Cable Connector 1
5 HDMI Cable Connector 1
NOTE: If the console does not light up, contact Customer Support Service. Use only the power supply provided in
order to ensure against unsafe operation.
NOTE: CSAFE connections must be made at the console only.
CAUTION: Connectors should easily fit into the receptacles. Forcing a connection may lead to damage to the
barrel connector and/or receptacle and may void product warranty. If the power supply barrel doesn’t fit easily
into the receptacle then the wrong power supply is being used.
Page 8 of 45