Lifan Power USA. 2250 Industrial Park Rd. Van Buren, AR 72956
PH 866-471-7464 www.lifanpowerusa.com
20
For first time use, you should operate according to the steps bellow:
● Installing battery - take off red cap on positive battery terminal.
● Use a multi-meter to check voltage of battery before installing and starting. If
reading is below 12.6V, recharge battery.
● Loosen positive battery clip. Connect positive terminal fully and adjust direction.
Tighten terminal nut on battery clip and place red rubber cover over terminal.
● Follow the same steps for negative or black battery lead, then place rubber cover
over terminal.
The battery represents a risk of high short circuit current. When
working on the battery, always remove watches, rings or other metal objects, and
only use tools that have insulated handles!!!!!!!!!
Installing, Servicing or Exchanging the Battery
should be performed or supervised
by knowledgeable personal. Battery connection or exchange requires precautions and
protective gear. Always wear face and eye protection with electrical rubber gloves, boots
and battery apron. Keep unauthorized personnel away from battery.
When replacing battery, always use the same size battery and number type: 12V,
Lead-acid battery.
CAUTION
– Do not dispose of battery or batteries in a fire. Batteries are capable of
exploding.
CAUTION
– Do not open or mutilate the battery. Released electrolytes have been known
to be harmful to skin, eyes and to be toxic.
CAUTION
– A battery presents a risk of electrical shock and high short circuit current.
The following precautions are to be observed when working on batteries:
1) Remove watches, rings, or other metal objects,
2) Use tools with insulated handles,
3) Wear rubber gloves, apron and boots,
4) Do not lay tools or metal parts on top of batteries,
5) Disconnect
7. Grounding
Make sure the generator set is grounded. Check grounding strap to make sure the
generator set ground terminal.
