EQUIPMENT PROTECTION FACTS
Inspect Upon Delivery:
FIRST! Inspect for missing or damaged components. See “Initial
Set-Up/Installation” section for where to report missing or damaged parts.
Add Engine Oil:
Engine is shipped
without oil.
See the “Engine Manual” section of this manual
for instructions on capacity and viscosity recommendations.
Water Flow Requirements:
Make sure your supply water flow rate is 20% higher than the
pressure washer’s flow rate (see “Operations” section for detail), and that your water is clean
and particle free.
Do not run Pressure Washer without proper inlet water supply (20 gallons per minute at
20 psi [pounds per square inch]) to high pressure pump and for more than 1 minute
without depressing trigger on gun to circulate water to avoid damaging pump.
Chemical Spraying:
Use only approved pressure washer chemicals designed for high-pressure
use. Use soap adjustment knob to regulate cleaning power (on select units).
Storage:
Do not allow water to freeze in the pump, hose, or spray gun(s). See “Storage” for more
information.
Maintenance Schedule:
Engine and pump require periodic inspection and servicing to keep
pressure washer functioning efficiently. See “Maintenance Schedule Summary” for frequency
of servicing.
PLEASE READ THE
FOLLOWING INSTRUCTIONS!
1. Unit Shipped without engine oil. Axial Cam Pump shipped with correct oil
and sealed. See Preoperating Instructions for further information.
2. For repair under Warranty or questions concerning Warranty, DO NOT
RETURN this product to the Store where purchased. Follow the procedures
as outlined in the “WARRANTY POLICY” and “WARRANTY REGISTRATION”
in the Owner’s Manual. For any questions visit www.lifanpowerusa.com or
call 1-866-471-7464, Option 2 (Warranty and Service).
3. Read the “Owner’s Manual” prior to operating any equipment and familiarize
yourself with the Proper and safe operation of the equipment. If you have any
questions, visit www.lifanpowerusa.com or call 1-866-471-7464, Option 2
(Warranty and Service).
5
