25
Operation of Pressure Washer
•
Only operate pressure washer outdoors.
•
Prevent exhaust gas from entering, through
windows doors or ventilation intakes, any
confined areas.
•
DO NOT operate pressure washer inside any
enclosed or roofed areas.
BEFORE OPERATING PRESSURE WASHER: Refer to Pre-Operating In-
struction section for additional procedures and definitions.
1. Check pressure washer condition.
a. Inspect for signs of damage, oil or fuel leaks.
b. Remove excessive dirt and/or debris from the unit.
2. Check Inlet and Outlet Hoses.
a. Inspect general condition of hoses to ensure hoses are in
serviceable condition.
i. Outlet Hose must be constructed to withstand High-Pressure.
b. Ensure hoses and nozzles are securely installed.
3. Check the Engine.
a. Ensure proper engine oil amount.
b. Ensure air cleaner element is clean and installed.
c. Ensure proper fuel level amount.
4. Ensure pressure washer is on a level surface.
5. Ensure engine switch is in the “OFF” position.
6. Ensure pressure washer is at least 7ft away from building walls and
other equipment during operation. Do NOT place flammable objects
close to pressure washer.
7. Always operate within the length of your water hose for inlet pressure.
8. Do not operate with any tarps, covers, and any objects on top of the
unit.
9. Exhaust gas is hot and can cause combustible materials around your
unit to ignite, make sure unit is not operated within 7 feet of any
combustible materials and always keep a properly charged fire
extinguisher and be familiar with the use of the fire extinguisher.
