manualshive.com logo in svg

Liebert Vertiv GXT5, Инструкция по установке и эксплуатации

Поделиться
Скачать
Liebert Vertiv GXT5 Скачать руководство пользователя страница 87

Vertiv | Liebert® GXT5™ | Installer/User Guide

79

Figure 4-10 New and Confirm Password dialogs 

4.3.3. Selecting the Display Language

The LCD is multilingual. The available languages are English, French, Portuguese, Spanish, Chinese, German, 

Japanese, and Russian.

To change the language:

1.

At the main menu, select the Settings icon, and press 

Enter

.

2.

At the password prompt, use the up-arrow to select the first digit, press the down-arrow to move to the next

digit, repeat for each digit, then press 

Enter

 to access the settings.

3. Use the arrow buttons to select the Monitor tab, then press 

Enter

.

4.

Use the down arrow to highlight 

Language

, then press 

Enter

.

5.

Use the up/down arrows to select the language, then press 

Enter

.

All the LCD elements will now display in the selected language.

4.3.4. Setting the Date and Time

To adjust the date and time:

1.

At the main menu, select the Settings icon, and press 

Enter

.

2.

At the password prompt, use the up-arrow to select the first digit, press the down-arrow to move to the next

digit, repeat for each digit, then press 

Enter

 to access the settings.

3. Use the arrow buttons to select the Monitor tab, then press 

Enter

.

4.

Use the down arrow to highlight 

Date 

or 

Time

, then press 

Enter

.

5. Use the up/down arrows to select the date/time, then press 

Enter

 to confirm.

6.

Use the down arrow to select the digit to change and the up arrow to select the correct digit. Repeat as

needed to set each digit.

Содержание Vertiv GXT5









































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды