Liebert MONITORING OpenComms, Руководство пользователя

Страница: 15 / 56

System Configuration
9
3.0 S
YSTEM
C
ONFIGURATION
3.1 DIP Switch Settings
A four-position DIP switch is provided, but no user configuration via
DIP switches is necessary at this time.
3.2 Service Terminal
Refer to Accessing the Configuration Port on page 7 for explicit
details on accessing the service terminal / configuration port.
By default, the service terminal communication parameters are:
• 9600 bps
• No parity
• 8 data bits
• 1 stop bit
• Flow Control: None
After connecting to the OpenComms NIC card, press the space bar or
< Enter > key to activate the service terminal session. If no response is
apparent and you have verified connectivity, cycle power on the Open-
Comms NIC and the service terminal sessions should appear automat-
ically.
!
CAUTION
Cycling power on either the 7200 or the HiPulse UPS is not
recommended unless the unit is in bypass mode. Consult the
UPS user manual for further instructions.