Liebert Hisp Скачать руководство пользователя страница 11

Страница: 11 / 94

English

8 --- Calibrations

The air conditioner has already been factory---tested and calibrated as described below.

COMPONENT

CALIBRATIONS

NOTES

Low pressure switch

(LP)

STOP

: 1 bar

START

: 2 bar

(fixed calibrations)

automatic

reset

High pressure switch

(HP)

STOP

: 28 bar

START

: 20 bar

(fixed calibrations)

manual reset

pressing the

push button

Fan speed adjuster

(BV)

SET.

: 18.8 bar

BAND P : 3.8 bar

(For adjusting see the instruc-

tions enclosed on the ma-

chine)

9 --- Maintenance / Spare parts

For safety reasons, if possible, cut the unit out, by operating the QS1 switch before carrying out any maintenance.

The Maintenance Programme described below should be carried out by a skilled technician, preferably working under a mainte-

nance contract.

Maintenance programme --- Monthly check

FANS

Check that the fan motor rotates freely without any abnormal noise, and ensure that the

bearings are not running hot.
Also check the current absorption.

AIR FILTERS

Check the state of the filter; if necessary clean or replace it.

To replace it:

remove the lower panel of the unit

extract the filter from its seat vertically

fit the spare part

close the panel

In very dusty environments perform this check more frequently.

ELECTRICAL CIRCUIT

Check the power supply on all phases.

Ensure that all electrical connections are tight.

REFRIGERATING CIRCUIT

Check the evaporating pressures (to be done by an expert technician).

Check the compressor current absorption, its head temperature and the presence of

any unusual noise.

Ensure that there is no ice formation on the evaporator.

9.1 --- Dismantling the unit

The machine has been designed and built to ensure a continu-

ing operation. The working life of some of the main compo-

nents, such as the fan and the compressor, depends on their

maintenance. If the unit has to be dismantled, this must be

done by skilled refrigerator technicians.

The refrigerating fluid and the lubricating oil, contained in the

circuit, must be collected according to the lawsof your Country.

9.2 --- Spare parts

It is recommended the use of original spare parts.

When placing an order refer to “ComponentList” enclosed with

the machine and quote the unit model no. and serial no.

Содержание Hisp































































































Результаты поиска

Содержание Hisp

Отзывы:

Похожие инструкции для Hisp

Бренды по названию

Популярные бренды

Liebert Hisp, Руководство по обслуживанию

Результаты поиска

Содержание Hisp

Отзывы:

Похожие инструкции для Hisp

Бренды по названию

Популярные бренды