Lichtlauf Ledl, Инструкция по эксплуатации, Страница: 6 / 7

Pass the ceiling outlet through the opening
(A) in the canopy box.
Fasten it with three screws suitable for your
ceiling.
Connect the conductor (L) and neutral con-
ductor (N) (marked on the luster terminal)
of the control gear to the corresponding
conductor of the ceiling outlet.
Connect (+) and (-) of the secondary line of
the control gear with (+) red and (-) black
of the luminaire cable to the connection
terminals.
Close the canopy with the three screws
provided.
Attach the cover plate (B) to the canopy by
screwing in the cable securing device (C).
Secure the lamp cable against slipping out on
the cable securing device by screwing in the
grub.
Fastening with hook next to
the canopy
(D) Attach the hook to the ceiling. Use a
dowel suitable for your ceiling. Adjust the
pendulum length and slide the transparent
shrink tubing over the cable loop. Insert the
thimble into the cable loop. Tighten the cable
tie over the shrink tubing. Make sure it is
tight and shorten the excess length of the
cable tie.
Mounting without flush-
mounted box (A)
L
N
For ceiling mounting
(B)
(C)
(D)
thimble
cable tie
heat-shrink
tubing