Lichtlauf Ledl, Инструкция по эксплуатации, Страница: 4 / 7

[A] Assembly of the luminaire cable
20 mm
10 mm
--
+
1. Define the suspension height of the lumi-
naire. Cut the luminaire cable to length with
an addition of approx. 10 cm.
2. Assemble the luminaire cables according to
the drawing. [A]
Remove approximately 20 mm of the outer
sheath. Please be careful! The coaxial braid
must not be damaged.
Then twist the coaxial braid into a conductor
(-).
Provide this with a piece of shrink tubing.
Then a larger one over the place where the
two conductors share.
Insulate both conductors by approx. 10 mm.
Finally squeeze the conductors with one
ferrule each.
Before you start mounting and connecting
the luminaire, make sure that the supply
cable is disconnected from the mains!
Remove the fuse!