Lichtlauf Ledl, Инструкция по эксплуатации, Страница: 5 / 7

Mounting on flush-mounted
box
Pass the secondary line of the control gear
through the opening (A).
Connect the conductor (L) and neutral con-
ductor (N) (marked on the luster terminal)
of the control gear to the corresponding
conductor of the ceiling outlet in the luster
terminal in the flush-mounted box.
Fasten the canopy to the flush-mounted box
using suitable screws.
You can also fix the box to the ceiling if re-
quired. Use suitable screws for your ceiling.
Connect (+) and (-) of the secondary line of
the control gear with (+) red and (-) black
of the luminaire cable to the connection
terminals.
Close the canopy with the three screws
provided.
Attach the cover plate (B) to the canopy by
screwing in the cable securing device (C).
Secure the lamp cable against
Slide out of the cable safety catch by screw-
ing in the grub.
Fastening with hook next to
the canopy
(D) Attach the hook to the ceiling. Use a
dowel suitable for your ceiling. Adjust the
pendulum length and slide the transparent
shrink tubing over the cable loop. Insert the
thimble into the cable loop. Tighten the cable
tie over the shrink tubing. Make sure it is
tight and shorten the excess length of the
cable tie.
Mounting on flush-mounted box
(A)
L
N
(B)
(C)
(D)
thimble
cable tie
heat-shrink
tubing