LIBRA Gear motor 230V for sectional, Инструкция по установке и эксплуатации

Страница: 13 / 17

E9.
E10.
2000 CYCLES ALERT SETTING
This function is normally OFF from factory settings.
To set a warning sound when the garage door opener reaches 2000 cycles, please carry out the
following procedure:
COMMISSIONING FINALIZING
Press “ - ” key till the
display shows “ 9 ”
Press “ P ” key, the
display shows “ 0 ”
to mean that the
2000 cycles alert is
OFF
Press “ - ” key till the
display shows “ 0 ” to
set the 2000 cycles
alert
OFF
Press “ + ” key till the display
shows “ 1 ” to set the 2000
cycles alert ON
Press “ P ” key
to save the settings
Exit way to alert sound down: cut off the power supply and then turn it on again
Press “ + ” to select “ 1 ”
Keep pressing “ P ”
for 8 seconds
The display “ 0 ” and
control unit exit the
commissioning mode.
N.B. You must carry out this finalizing procedure, otherwise
all the previous settings will be lost.
WARNING
WARNING
11
GB GB