LIBRA Gear motor 230V for sectional, Инструкция по установке и эксплуатации

Страница: 10 / 17

E3.
E4.
.
FORCE SETTING
PHOTOCELLS SETTING
This function is normally inactive from factory settings.
If you don't want to install any photocell you don't need to carry out this procedure.
You can skip to the next setting menu by pressing “
- “ key twice
Press “ - ” key till the
display shows “ 3 ”
Press “ P ” , “ 3 ” must flash The door automatically opens
When the door stops,
press “
P ” key twice
The door automatically
closes
Then press “ P ” key to
save the setting
Once the full cycle has finished, you can press “ + ” key to select menu “ 1 ” and
then keep pressing “P” key till the display shows “ 0 ”.
Now the basic commissioning procedure has been completed.
Press “ - ” key till the
display shows “ 4 ”
Press “ P ” , “ 4 ” must flash Press “ + ” key to activate
the photocell function;
the control unit will beep once
Press “ - ” key to turn
off the photocell
function; the control
unit will beep twice
Then press “ P ” key
to save the settings
WARNING
8
GB GB