DL-AS61U-H2 Installation Guide
9
Connect Ethernet (Web Browser) Control (Optional)
The DL-AS61U-H2 may be controlled via Ethernet through a web browser interface.
The TCP/IP port requires a standard straight-through Category 5
or greater cable with the TIA/EIA-568B crimp pattern for optimal
operation.
The default settings for the TCP/IP port are:
IP address: 192.168.0.178
TIA/EIA-568B
Orange/White
Orange
Green/White
Blue
Blue/White
Green
Brown/White
Brown
Pin 1
Pin 2
Pin 3
Pin 4
Pin 5
Pin 6
Pin 7
Pin 8
1
8
Connect the Ethernet cable between to the matrix and a router
with a straight-through cable or between the matrix and a
computer with a crossover cable.
Router Connection
1.
Configure the router to use the same IP range as the matrix, such as 192.168.0.1.
2.
Connect the computer to the router.
3.
Connect the DL-AS61U-H2 to the router
Crossover Cable Connection
1.
Configure the computer to use the same network prefix as the IP address assigned to the matrix.
For
example, the IP address of the matrix is 192.168.0.178. Set the computer to use a static IP address within
the same network range, such as 192.168.0.42.
2.
Connect the network crossover cable to the computer and to the TCP/IP port on the DL-AS61U-H2
Web Browser Control
The DL-AS61U-H2 includes a web portal to allow control of the matrix via a standard web browser. The IP
address is the same address that is used for TCP/IP control.
TIA/EIA-568A
Green/White
Green
Orange/White
Blue
Blue/White
Orange
Brown/White
Brown
Pin 1
Pin 2
Pin 3
Pin 4
Pin 5
Pin 6
Pin 7
Pin 8
1
8
TIA/EIA-568B
Orange/White
Orange
Green/White
Blue
Blue/White
Green
Brown/White
Brown
Pin 1
Pin 2
Pin 3
Pin 4
Pin 5
Pin 6
Pin 7
Pin 8
1
8
Crossover Cable Pinout
