DL-AS61U-H2 Installation Guide
17
The
RS232
menu allows you to test RS232 command strings through the RS232 serial port output on the switcher
connected to a 3rd party device such as a display or projector.
Check either
ASCII
or
HEX
formatted string to send to RS232 output, choose the desired
Baud Rate
setting,
choose the desired
Command Ending
terminator, then enter the command string under the
Command
field.
Then click
Send
to test the command.
To test HEX formatted commands use the following syntax format: XX XX XX XX (XX = hex character). Example;
the display ON command you are testing is 0xA1 0xA2 0xA3 0xA4 0xA5, enter in A1 A2 A3 A4 A5 into the
Command
field to test, the 0x identifiers is not necessary.
Testing RS232
