LIBERTY AV SOLUTIONS DL-USB-PTZ10-B, Быстрое руководство

Страница: 7 / 31

7
QUICK GUIDE / DL-USB-PTZ10-B
Camera Maintenance
• Power off the camera and disconnect the power adapter and socket, if it’s not used for a
long period of time.
• Use a soft cloth or tissue to clean the camera cover.
• When cleaning the camera lens, use a soft, dry cloth and wipe it gently with a mild detergent,
if needed. Do not use strong or corrosive detergents to avoid scratching the lens and affecting the
video quality.
• Do not rotate the camera head violently; otherwise, it may cause mechanical failure.
• This product should be placed on a stable desktop or other horizontal surface. Do not install the
product obliquely; otherwise, it may not display a level image.
• Ensure there are no obstacles within rotation range of the holder.
• Do not power on before completing the installation.
Troubleshooting
No video output
a. Check whether the camera power supply is connected and receiving power.
c. Check whether the bottom of the DIP switch is switched to normal operating mode.
d. Check whether the video output cable has been disconnected.
e. Check whether the camera is selected within the software.
Remote control is not working
a. Check if the batteries are installed properly and are new.
b. Check to see if the remote control address is set to 1. If the machine is set back to the factory
defaults, the remote control addresses need to be set back to 1, too.
c. Make sure the menu setting has been closed out.
Serial port is not working
a. Check whether the camera serial device protocol, baud rate, address is consistent.
b. Check whether the control cable is connected properly.
MAINTENANCE AND TROUBLESHOOTING