LIBERTY AV SOLUTIONS DL-USB-PTZ10-B, Быстрое руководство

Страница: 6 / 31

6
QUICK GUIDE / DL-USB-PTZ10-B
Power-on
Connect the extenral power supply to the camera.
USB 2.0 Y Cable
The provided USB 2.0 Y cable can provide power in addition to sending video and control. To enable this
feature, the Y end needs to be connected into two USB host sockets or from a powered USB hub, while
only transceiving data from one of those sockets. The camera peripheral is able to be powered over
USB, but requires more power than one USB port can supply, but not more than what two ports can
supply. If the USB signal needs to be extended, this feature may be lost and the external power supply
may be needed in supplying sufficient power to the camera. Liberty AV offers USB signal extenders with
a built in powered hub, enabling the USB power feature in addition to signal extension. In the case your
environment does not allow for a second USB port, the provided external power supply may be used to
power the camera. Once the external power supply is connected into the camera, the USB power feature
is disabled.
* Note - the Y end with the black connector is the primary connection, while the red connector is intended
for enabling the USB power feature.
Initial Configuration
• The remote control receiving indicator will start to flash after the camera has been powered on.
• The camera will pan-tilt and then move to the HOME position (both the horizontal and vertical
positions are in the middle). When the remote control's receiving indicator stops flashing, the
self-checking is completed.
• After powering on and self-checking, the camera will automatically return to the defined preset 0.
• The default address for the IR remote control is 1#. If the menu has been restored to factory defaults,
the remote control default address will restore to 1#.
Requirements - A computer with a USB connections
Install the video conferencing desktop client such as Zoom, Teams, Google meet onto the computer.
Note: Verify your preferred video calling application requirements.
Placement - Reference the mounting options and choose what best fits your needs.
Connectivity - Locate the Digitalinx PTZ Camera and provided USB cable. Plug the cable into the USB port
of the computer and camera. If the length of the USB cable is not long enough, use a TYPE A USB 2.0
extension cable, signal extender or USB hub.
Navigation - Go to settings>privacy>camera (or similar) on your PC and turn on “let apps use my camera.”
Close all other applications that may use the PTZ Camera.
SETTING UP YOUR PTZ CAMERA