DL-PSU8 Installation Guide
7
System Control
Connect a control system to the
DL-PSU8
via RS232 for switcher control.
Connecting RS232 Control
RS232 Wiring
Connect the system controller RX signal
to TX on the
DL-PSU8
, then connect the
controllers TX signal to RX on the
DL-PSU8
.
RS232 Settings:
•
9600 baud
•
8 Data Bits
•
1 Stop Bit
• Parity = none
DL-PSU8
RS232 Port
Conncected RS232 Device pins
TX RX G
RX TX G
RS232 Port Wiring
Connect Ethernet Control
The DL-PSU8 can be controlled via Ethernet through a web browser interface or can be controlled using Telnet
commands
The TCP/IP port requires a standard straight-through Category 5
or greater cable with the TIA/EIA-568B crimp pattern for optimal
operation.
The default settings for the TCP/IP port are:
IP address: 192.168.0.178, Telnet Port 4001
TIA/EIA-568B
Orange/White
Orange
Green/White
Blue
Blue/White
Green
Brown/White
Brown
Pin 1
Pin 2
Pin 3
Pin 4
Pin 5
Pin 6
Pin 7
Pin 8
1
8
User name and password for the web GUI is
admin
