Libelium waspmote plug & sense Скачать руководство пользователя

Страница: 6 / 162

-6-

v5.8

General and safety information

1. General and safety information

•

Read carefully Limited Warranty and Terms and Conditions of Use before using “Waspmote Plug & Sense!”.

•

Do not open casing and do not damage black warranty stickers. If you do so, you will lose warranty.

•

Do not remove any of the connectors.

•

Do not allow contact between metallic objects and electronic parts to avoid injury and burns.

•

Never immerse equipment in any liquid.

•

Keep equipment within temperature range indicated in recommendation section.

•

Do not connect or power equipment using cables that have been damaged.

•

Place equipment in an area to which only maintenance personnel can have access (in a restricted access zone)

•

In any case keep children away from the equipment.

•

If there is a power failure, immediately disconnect from the mains.

•

If using a battery whether or not in combination with a solar panel as a power source follow the voltage and current

specifications indicated in the section “External solar panel connector”.

•

If a software failure occurs, contact Libelium technical support before doing any action by yourself.

•

Do not place equipment on trees or plants as they could be damaged by its weight.

•

Be particularly careful if you are connected through a software interface for handling the machine; if settings of that

interface are incorrectly altered, it could become inaccessible.

•

If you need to clean the node, wipe it with a dry towel.

•

If Waspmote Plug & Sense! needs to be returned please send it completely dry and free from contaminants.

•

Waspmote Plug & Sense! is not designed to be placed in hard environmental conditions, under dangerous chemical

elements, explosive atmospheres with flammable gases, high voltage installations or special installations. Please contact

Libelium technical support to ensure your application is compatible with Waspmote Plug & Sense!

Содержание waspmote plug & sense



































































































































































Результаты поиска

Содержание waspmote plug & sense

Отзывы:

Похожие инструкции для waspmote plug & sense

Бренды по названию

Популярные бренды

Libelium waspmote plug & sense, Техническое руководство

Результаты поиска

Содержание waspmote plug & sense

Отзывы:

Похожие инструкции для waspmote plug & sense

Бренды по названию

Популярные бренды