Libelium Meshlium Xtreme страница 45 Скачать руководство пользователя

Страница: 45 / 214

-45-

v7.3

Wireless Sensor Networks

Meshlium

treme

In this module the parameters to setup are:

•

PAN ID:

Personal Area Network ID (also known as Network ID). It is the identifier of the network. It has to be

the same in all the nodes in order to be able to send data to this Meshlium.

•

Channel:

Frequency channel used for transmissions.

•

Network Address:

User defined identifier for the node in the network. 4 hexadecimal digits (MY).

•

Node ID:

readable name set for the device, by default “Meshlium”. Up to 20 characters.

•

Power level:

[0-4] By default 4.

•

Encrypted mode:

Internal XBee AES 128 bits encryption. Disabled by default.

•

Encryption key:

16 characters.

•

MAC:

64 bits hardware address of the module. It is a read-only value divided in two parts:

MAC-high: 32 bits (8 hexadecimal digits)

MAC-low: 32 bits (8 hexadecimal digits)

This setup must be consistent with those set on the Waspmote and Plug and Sense nodes.
In the bottom part of the interface, the button “

Check status

” allows to check if the module setup is concordant

with values shown in the interface. The button “

Save

” will write the parameters in the module.

Both process (“Save” and “Check status”) require the sensorParser daemon to be stopped. This means no frames

will be received while executing this actions. Be patient this can take up to 1 minute to finish.

Содержание Meshlium Xtreme























































































































































































































Результаты поиска

Содержание Meshlium Xtreme

Отзывы:

Похожие инструкции для Meshlium Xtreme

Бренды по названию

Популярные бренды

Libelium Meshlium Xtreme, Техническое руководство

Результаты поиска

Содержание Meshlium Xtreme

Отзывы:

Похожие инструкции для Meshlium Xtreme

Бренды по названию

Популярные бренды