Libelium Meshlium Xtreme, Техническое руководство

Страница: 204 / 214

-204- v7.3
Rescue System
Meshlium
X
treme
19. Rescue System
The Rescue System allows the user to return Meshlium to factory defaults. After applying the rescue, the device
will be formatted and the disk will be left as it was brand new.
The rescue process is recommended when:
•
The operating system is corrupt or malfunctioning
•
The device has been wrongly setup and it is unreachable
•
The device needs to be recovered after an unexpected error
The rescue process is not covered by warranty as described in the section “Important: read me before using”.
and must be considered an emergency process. This process is intended to help the user to recover the device of
software issues without having to send Meshlium to the technical support service.
Important:
Executing the rescue process will delete all the user information stored in Meshlium including sensor information
stored in the internal database.
The rescue process can potentially damage the device and left it unusable.
The rescue process may not work if the file system is severely damaged.
19.1. Rescue steps
You will need a USB pen drive of at least 8 GB.
The first thing to do is download from the website of Libelium the image file “meshliumrescue.iso” needed to
restore Meshlium to factory defaults.
Note: You need to contact first our Technical Service Department in order to get the user and password and URL
to download the image.
Go to https://www.libelium.com/contact/#RMA .
Once the file has downloaded, you must burn it in a USB pen drive. To perform this operation we recommend the
use of unetbootin .
Unetbootin is a freeware and multiplatform application that allows to create bootable USB pendrives. It can be
installed easily in Windows, Linux and MacOS machines.
Figure: unetbootin interface