LI-COR Li-189, Инструкция по эксплуатации

Страница: 11 / 23

Sensor Calibration
10
For type 'SA' sensors purchased after September, 1985, the
calibration multiplier is given on the certificate of calibra-
tion, and is also attached to the sensor. The calibration la-
bel attached to a quantum sensor appears as follows, and
contains the value of the multiplier, as well as the serial
number of the sensor, and the date of its most recent cali-
bration.
MULT:
tcoff: 0.0036
Units:
µ
mol s
-1
m
-2
per
µ
A
SERIAL NO.
CAL DATE: DD/MM/YR
®
For the LI-192SA and LI-193SA Underwater Quantum
Sensors there are two calibration multipliers; one for "in
air" operation and one for "in water" operation. Use the
multiplier that is appropriate for your application.
If the calibration constant for your sensor has been lost or
misplaced, it can be obtained from LI-COR by providing
the serial number of the sensor.