LGB 29272, Руководство пользователя

Страница: 13 / 48

13
Programming by means of Pages (Universal-Handy 55015)
All CVs up to CV 1024 can be changed with programming by means of pages. The
process can be compared to programming by means of CVs, but it uses the CVs 1 to 4
in place of CV 5 for the value. Pages are areas in which 4 addresses can be summa-
rized. CVs 1 to 4 correspond then to the 4 addresses that are summarized on the page.
The numbers to be entered can be generated with the following equations:
(CV - 1 ) / 4 = Page Whole number result is Page
(decimal x 4) + 1 = Data CV
If for example CV 322 is to be programmed at 200, the following calculation will result:
(322 -1) / 4 = 80,25 Page 80; CV6 = 80
0,25 x 4 + 1 = 2 Value in CV 2
In order to program that the „page“ 80 is first programmed in CV 6 and the value 200
is immediately programmed in CV 2.
Speed Levels
This decoder can be operated with 14 or 28/128 speed levels (CV 29, Bit 1). Make sure
that the setting on the decoder is compatible with the settings on your controller.
Long Address
This decoder can be controlled in DCC by means of a short (CV 1, address 1 – 127)
or a long address (CV 17 & CV 18, address 1 – 10239). Both addresses are basically
always occupied. CV 29, Bit 5 is used to determine which of the two addresses is
currently valid.
The settings for the long address are calculated as follows:
X = Address / 256 (only the whole number part)
CV 17 = X + 192
CV 18 = Address – (X x 256)
Example:
Address 1324
X = 5 (1324/256=5,17)
CV 17 = 197 (5+192=197)
CV 18 = 44 (5*256=1280; 1324-1280=44)
Controllable Functions
Lighting *
LV + LR +
AUX 2 +
AUX 4
Lighting includes Swiss light changeover * 1 Sound 1
Sound effect: Squealing brakes off 2 BS
Smoke generator 3 Aux 2
Sound effect: Station announcements 4 Sound 4
Sound effect: Coal being shoveled 5 Sound 9
Sound effect: Operating sounds * 6 FS
Operating sounds with rack 7
Sound
13 + 16
Sound on/off 8 Sound 14
ABV, off 9
Engineer‘s cab lighting 10 AUX 3
Sound effect: Conductor whistle 11 Sound 5
Double A switching light 12
LV + LR +
AUX2 +
AUX4
13
Sound effect: Short whistle blast 14 Sound 2
Sound effect: Blowing off steam 15
Sound 15
* active in analog operation
Note:
At www.LGB.de, you will find at „Tools and Downloads“ an extensive description of
the decoder as well as a tool that you can use to calculate different settings.