Screw(Type A)
Screw(Type A)
Power cord
Foam-Strip
8
12
—16—
10. Slide the unit into the cabinet.(See Figure 26)
CAUTION: For security purpose, reinstall screws(Type
A) at cabinet's sides.
11. Cut the foam-strip
to the proper length and insert
between the upper window sash and the lower
window sash.
(See Figure 27)
12. Attach the window locking bracket
with a type C
screw. (See Figure 28)
13. Attach the front grille to the cabinet by inserting the
tabs on the grille into the tabs on the front of the
cabinet. Push the grille in until it snaps into place.
(See Figure 29)
14. Lift the inlet grille and secure it with a type A screw
through the front grille.
(See Figure 30)
15. Window installation of room air conditioner is now
completed. See ELECTRICAL DATA for attaching
power cord to electrical outlet.
Figure 26
Figure 27
Figure 28
Figure 31
Figure 30
Figure 29
