background image

ELAY 

S

TART (RE

S

ERVAT

I

ON) W

as

h

D

24

A

dditiona

Function

 

Pro

g

ram

DELAY START (RESERVATION) Wash is used to delay the finishing time of the operation.
The hours to be delayed can be set by the user accordingly. 
The time on the display is the finishing  time , not  the start time. 

• When you press the 

START/PAUSE

button the light will

blink.

• Select the  program for laundry on the Control panel.

This program will not work in WOOL and TUB CLEAN
Program.

Press the

POWER (AUTO OFF)

button to turn power on.

Press the

PROGRAM

button to select the washing program.

Add the laundry and press the 

START/PAUSE

button.

• Add the appropriate quantity of Detergent as the Detergent

manufacture instruction.

• When the lid is open the machine will not operate, and an

alarm signal will remind you to close the lid

Add the Detergent.

• Water will be supplied for 2 minutes after the start of the

wash to supplement the water the laundry has absorbed.

Close the lid. 

• The washing will be finished according to the delayed time.

Finish

1

2

4

5

6

3

• The light will ‘DELAY’ turn on and 

‘TIME  LEFT’                      will be marked.

• Press the button repeatedly to set the desired finishing time.

For example, To finish washing in 9 hours from now,  by
make the number 9:00 pressing the 

DELAY START

(RESERVATION )

button repeatedly.

Press the 

DELAY START

(

RESERVATION

)

button.

(RES.=DELAY)

• Finishing time can be delayed from 3~48 hours. Delaying from3~12 hours can be done in 1 hour time intervals

and from 12~48 hours in 2 hour time intervals. 

• If the lid is open,  the machine will not work, and  an alarm signal will alarm to remind you to close the lid. 
• To select washing time, rinsing times, spinning time, water level, hot/cold or wash power manually, press the

DELAY START (RESERVATION) button and select the desired option. Then press the START/PAUSE button.

• When the laundry cannot be taken out immediately after the wash program ends, it is better to omit the spinning

program . (The laundry will be wrinkled if left for a long time after spinning.)

NOTE

Содержание WF-D120V









































Отзывы: