Wireless Remote Control
Inserting Battery
1
Push out the cover on the back of the
remote control with your thumb.
2
With the plus and minus poles facing as
marked, and insert one new AAA 1.5 V
battery.
3
Reattach the cover.
NOTE
●
One new battery are supplied with the air
conditioner for use in the remote control.
●
Do not use a rechargeable battery. Make sure
that the battery is new.
●
In order to prevent discharge, remove the
battery from the remote control if the air
conditioner is not going to be used for an
extended period of time.
●
Keep the remote control away from extremely
hot or humid places.
●
To maintain optimal operation of the remote
control, the remote sensor should not be
exposed to direct sunlight.
5
Temperature Control
The thermostat monitors room temperature
to maintain the desired temperature. The
thermostat can be set between 16 °C–30 °C
(60 °F–86 °F). Press
or
arrows to
increase or decrease temperature setting.
6
Remote Control Sensor
Clean Filter
The Clean Filter (Limpieza Filtro) LED lights
up to notify you that the filter needs to be
cleaned. After cleaning the filter, press
Temp
and
together on the control
panel to turn off the Clean Filter (Limpieza
Filtro) light.
NOTE
control panel, not the remote control.
●
●
This feature is a reminder to clean the air
light turns on after 250 hours of operation.
filter for more efficient operation. The LED
The filter reset must be done using the
7
NOTE
●
Auto Restart:
If the air conditioner turns off due
to a power outage, it will restart automatically
once the power is restored, with the same
settings as were set before the unit turned off.
●
Energy Saver (Ahorro Energía) :
The unit
defaults to the Energy Saver (Ahorro Energía)
mode each time the unit is switched on except
in Fan (Vent.) mode or when power is restored
after an electrical power outage.
●
The remote control will not function properly if
the AC infrared sensor is exposed to direct light
or if there are obstacles between the remote
controller and the air conditioner.
.
17
OPERATION
EN
