OPERATION
Control Panel and Remote Control
Remote Control
1
Power
Press to turn the air conditioner ON or OFF.
2
Fan Speed
Press to set the fan speed to Low (Bajo) (F1),
Medium (Medio) (F2) or High (Alto) (F3).
3
Delay ON/OFF Timer
Delay ON
- When the air conditioner is off,
set it to automatically turn on from 1 to 24
hours later, at its previous mode and fan
settings.
Delay OFF
- When the air conditioner is on,
set it to automatically turn off from 1 to 24
hours later.
NOTE
●
Each press of the
Timer
(Control Tiempo),
button advances the timer by 1 hour. After
the last press the display returns to the
temperature setting.
4
Operation Mode
Press the Mode (Modo) button to cycle
between 4 types of air conditioner operation:
Energy Saver (Ahorro Energía) / Cool (Frío) /
Fan (Vent.) / Dry (Deshum).
Cool (Frío)
Fan (Vent.)
- In this mode the fan circulates
air but the compressor does not run. Use
the
Fan Speed (Nivel Vent.)
button to set fan
speed to High, Medium or Low. In this mode,
you cannot adjust the set temperature.
Dry (Deshum)
- This mode is ideal for rainy
and damp days to dehumidify the room rather
than cooling it significantly. Humidity is
removed from the room by the combination
of compressor operation and the fan speed
fixed at Low. The compressor and fan turn
off once the set temperature is reached.
Fan speed cannot be adjusted in Dry (Deshum)
mode.
1
4
2
5
3
- This mode is ideal on hot days
to cool and dehumidify the room quickly. Use
the
Temp
buttons to set the desired
room temperature and use the
Fan Speed
(Nivel Vent.)
button to set the desired fan
circulation speed.
Energy Saver (Ahorro Energía)
- In this
the compressor and fan turn off when the
set temperature is achieved. Approximately
every 3 minutes the fan turns on to allow
the unit sensor to accurately determine if
more cooling is needed.
7
1
2
3
4
5
6
16
OPERATION
