LG VR6140LVM Скачать руководство пользователя страница 4

Страница: 4 / 40

SAFETY PRECAUTIONS

The purpose of the safety precautions described below is for the user to use the product safely and

correctly to prevent any unexpected risk of injury or damage.

Basic safety precautions

For your safety, do not remove the

battery from the HOM-BOT 2.0. If

you need to replace the battery or the

HOM-BOT 2.0, take it to the nearest

authorized LG Electronics service

center or dealer for assistance.

Failure to follow this warning can

cause fire or product failure.

Never use the HOM-BOT 2.0 with

a battery and/or home station from

any other product than the

HOM-BOT 2.0.

Doing so can cause fire or product

failure.

After reading this manual, please keep it in an easily accessible location.

This is the safety alert symbol. This symbol alerts you to potential hazards that can result in

property damage and/or serious bodily harm or death.
Indicates a hazardous situation which, if not avoided, could result in death or serious injury.

Indicates a hazardous situation which, if not avoided, could result in minor or moderate injury.

WARNING

CAUTION

1. This appliance is not intended for use by persons

(including children) with reduced physical, sensory or

mental capabilities, or lack of experience and knowledge,

unless they have been given supervision or instruction

concerning use of the appliance by a person responsible

for their safety.

2. Children should be supervised to ensure that they do

not play with the appliance.

3. If the supply cord is damaged, it must be replaced by

LG Electronics Service Agent in order to avoid a hazard

4. This appliance can be used by children aged from 8

years and above and persons with reduced physical,

sensory or mental capabilities or lack of experience

and knowledge if they have been given supervision or

instruction concerning use of the appliance in a safe way

and understand the hazards involved. Children shall not

play with the appliance. Cleaning and user maintenance

shall not be made by children without supervision.

Содержание VR6140LVM









































Результаты поиска

Содержание VR6140LVM

Отзывы:

Похожие инструкции для VR6140LVM

Бренды по названию

Популярные бренды

LG VR6140LVM, Руководство пользователя

Результаты поиска

Содержание VR6140LVM

Отзывы:

Похожие инструкции для VR6140LVM

Бренды по названию

Популярные бренды