LG VR6140LVM Скачать руководство пользователя страница 17

Страница: 17 / 40

HOW TO START AND STOP CLEANING

After the HOM-BOT 2.0 is turned on, press the START/STOP button

to begin cleaning. A melody will sound and cleaning will begin.
Press the START/STOP button during the cleaning cycle to stop

cleaning.

※

When the ‘START/STOP’ button is pressed while the power supply

of the HOM-BOT 2.0 is turned off, the power will be turned on.

Press the ‘START/STOP’ button one more time to start cleaning.

After the HOM-BOT 2.0 is turned on, press the START button on the

remote control. A melody will sound and cleaning will begin.
Press the STOP button during the cleaning cycle to stop cleaning.

※

The HOM-BOT 2.0 cannot be turned on from Stand By, by using

the remote control when the power of the HOM-BOT 2.0 is off.

When the power is off, press the ‘START/STOP’ button on the

upper side of HOM-BOT 2.0 to turn the power on and to allow the

remote to be used.

※

During cleaning, collisions can happen when the sensor cannot detect objects because of their shape (Thin

chair and table leg, furniture corner). When this happens, the internal impact detecting sensor will avoid

the obstacles by using a backward motion.

※

If the HOM-BOT 2.0 is set to start cleaning at a location away from the home station, put the device on

a flat floor in order to prevent a malfunction of the obstacle detecting sensor. In addition, start cleaning
from a location where there are not any obstacles such as curtains or walls within 30

(11.8 in) of the

HOM-BOT 2.0.

For best results:

• Briefly scan the area to be cleaned for big and small objects that will cause difficulty for the

HOM-BOT 2.0.

• If cleaning is started when the HOM-BOT 2.0 is at the home station, the device can rapidly

be returned to the home station as the current home position has been accurately read.

• For the safety of the HOM-BOT 2.0, a step height of more than 10

(0.4 in) cannot be

crossed.

• When then mop plate is fitted, the HOM-BOT 2.0 cannot go over door sills or step treads

that are higher than 5

Using the buttons on the HOM-BOT 2.0

Using the remote control

Tip

Содержание VR6140LVM









































Результаты поиска

Содержание VR6140LVM

Отзывы:

Похожие инструкции для VR6140LVM

Бренды по названию

Популярные бренды

LG VR6140LVM, Руководство пользователя

Результаты поиска

Содержание VR6140LVM

Отзывы:

Похожие инструкции для VR6140LVM

Бренды по названию

Популярные бренды