24
CLEANING THE BRUSH
Lay a smooth cloth on the floor.
Turn the Roboking over and
put the Roboking on the cloth.
Turn off the power switch before
cleaning.
Grab the brush and remove by
pulling it up.
Insert the fixing hook on the op-
posite side of the brush (marked
with a rounded rectangle) by
matching it to the separation
groove of the brush.
Separate the cover by press-
ing the fixing hook and pulling
upward.
Clean the brush with a
vacuum cleaner by hand, or
an old unused firm bristle
toothbrush.
Align the cover with the
fixing guides on the edge,
by matching it to the fixing
groove located on the main
frame.
Wearing gloves turn the brush
until the separation groove of
the brush appears.
Insert the fixing hook on the
side of the brush (marked with
the square) by matching it to
the fixing groove of the brush.
Close the cover by pressing
it down until you hear a click
from the fixing hook.
※
NOTE: Please make sure that
the side rotating brushes are
not caught under the cover
when refitting.
The brush, located on the bottom of the Roboking, helps with the suction of foreign objects. Perform the fol-
lowing steps to clean the brush:
Separation
groove of
brush
