manualshive.com logo in svg

LG V-NET ACS PREMTA000B, Инструкция по установке и эксплуатации

Поделиться
Скачать
LG V-NET ACS PREMTA000B Скачать руководство пользователя страница 20

OPERATION SETTING - ADVANCED MODE

39

ENGLISH

38

OPERATION SETTING - ADVANCED MODE

●

Touch panel is locked until you release the "Home Leave" mode.

NOTE

!

• You can’t change setting in home leave mode except cancel the set back mode.

- lock popup is displayed on the window.

• It can be canceled ,if remote controller receive command from other controller.
• When commands are received by other controllers, the home leave mode gets deacti-

vated.

• When the home leave mode is deactivated, the following takes place.

- The set points shall go to the current schedule set points.
- If there are no weekly schedule, the set point shall go to the last set points before the

home leave operation.

- If there are no set point before the setback operation, the set points will go to the default 

if the values have not been adjusted.

- Default setting will be auto. (heat 60 °F(16 °C), cool 86 °F(30 °C))

NOTE

!

You can You can’t change setting in ‘Hold’ except cancel the ‘Hold’
• It can be canceled ,if Thermostat receive command from other controller.
• When commands are received by other controllers, the Hold mode gets deactivated.

Hold

It is a function that holds the current mode of operation.

If it is on hold, weekly or yearly or holiday schedule cannot be operation.

●

Press the hold button on the screen.

●

Touch panel is locked until you release the “Hold" mode while driving in the “Hold" mode.

Содержание V-NET ACS PREMTA000B
















































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды