35
ENGLISH
»
Type of Connector: D-Sub 9-Pin Male
Male connector on box, viewed towards connector.
No.
Signal
Signal requirements
1
VCC
2
RX RS232
Standard RS232 specification
3
TX RS232
Standard RS232 specification
4
IR from TV
5
GND
Power ground
6, 8
Not connected
7
2 A
+5 V DC 10 %, max 100 mV ripple
9
1.5 A
+12 V DC 10 %, max 100 mV ripple
One Channel Map
(Depending on model)
•
If set to ‘Enable’, the TV will operate as below.
-
A. When the TV is auto-scanning, it searches both air and cable channels.
-
B. User can assign a channel number him/herself by manual scan.
-
C. In 'Channel Edit’ window, all channels are shown in a single list regardless of input source.
-
D. Automatically scanned channels may not have the user-desired channel numbers.
•
If user change the ‘Enable/Disable’ value, an pop-up window will be displayed to warn that all channel will be deleted. The Default value is
‘Enable’.
DTV Channel Update
•
It is a mode to set whether to update DTV Channel automatically or not.
•
When set to ‘Auto’, update Channel map according to DTV Channel’s stream information.
•
When set to ‘Manual’, keep Channel map even though DTV Channel’s information is changed.
On Timer Operation
•
It is a mode to select ‘Timer Power On’ working one time or repeatedly.
•
'Once': ‘Timer Power On’ in the user menu operates only one time.
•
‘Repeat’ : ‘Timer Power On’ operates repeatedly.
