background image

6

IMPORTANT SAFETY INSTRUCTIONS

ENGLISH

• When the product is not to be used for a long time, disconnect

the power supply plug or turn off the breaker. There is risk of
product damage or failure, or unintended operation.

• Take care to ensure that nobody especially kids could step on

or fall onto the outdoor unit. This could result in personal injury
and product damage. 

• Take care to ensure that power cable could not be pulled out or

damaged during operation. There is risk of fire or electric shock.

• Do not place ANYTHING on the power cable. There is risk of

fire or electric shock.

• Do not plug or unplug the power supply plug to turn the unit

ON/OFF. There is risk of fire or electric shock.

• When flammable gas leaks, turn off the gas and open a window

for ventilation before turn the product on. Do not use the
telephone or turn switches on or off. There is risk of explosion
or fire.

• Do not turn on the breaker or power under condition that front

panel, cabinet, top cover, control box cover are removed or
opened. Otherwise, it may cause fire, electric shock, explosion
or death.

• Use a vacuum pump or Inert (nitrogen) gas when doing leakage

test or air purge. Do not compress air or Oxygen and Do not
use Flammable gases. Otherwise, it may cause fire or
explosion. There is the risk of death, injury, fire or explosion.

• The appliance shall be stored in a room without continuously

operating ignition sources (for example : open flames, an
operating gas appliance or an operating electric heater.)

• Keep any required ventilation openings clear of obstruction.
• The appliance shall be stored in a well-ventilated area where

the room size corresponds to the room area as specified for
operation.

• Ducts connected to an appliance shall not contain an ignition

source.

Содержание UM30R














































Отзывы: