LG U8210 Скачать руководство пользователя страница 6

Страница: 6 / 231

1. INTRODUCTION

- 7 -

E. Notice of Radiated Emissions

This model complies with rules regarding radiation and radio frequency emission as defined by local

regulatory agencies. In accordance with these agencies, you may be required to provide information

such as the following to the end user.

F. Pictures

The pictures in this manual are for illustrative purposes only; your actual hardware may look slightly

different.

G. Interference and Attenuation

A phone may interfere with sensitive laboratory equipment, medical equipment, etc.

Interference from unsuppressed engines or electric motors may cause problems.

H. Electrostatic Sensitive Devices

ATTENTION

Boards, which contain Electrostatic Sensitive Device (ESD), are indicated by the sign.

Following information is ESD handling:

• Service personnel should ground themselves by using a wrist strap when exchange system boards.

• When repairs are made to a system board, they should spread the floor with anti-static mat which is

also grounded.

• Use a suitable, grounded soldering iron.

• Keep sensitive parts in these protective packages until these are used.

• When returning system boards or parts like EEPROM to the factory, use the protective package as

described.

Содержание U8210








































































































































































































































Результаты поиска

Содержание U8210

Отзывы:

LG U8210, Руководство по обслуживанию, Страница: 6 / 231

Результаты поиска

Содержание U8210

Отзывы: