LG U8210 Скачать руководство пользователя страница 5

Страница: 5 / 231

1. INTRODUCTION

- 6 -

1.1 Purpose

This manual provides the information necessary to repair, calibration, description and download the

features of this model.

1.2 Regulatory Information

A. Security

Toll fraud, the unauthorized use of telecommunications system by an unauthorized part (for example,

persons other than your company’s employees, agents, subcontractors, or person working on your

company’s behalf) can result in substantial additional charges for your telecommunications services.

System users are responsible for the security of own system. There are may be risks of toll fraud

associated with your telecommunications system. System users are responsible for programming and

configuring the equipment to prevent unauthorized use. The manufacturer does not warrant that this

product is immune from the above case but will prevent unauthorized use of common-carrier

telecommunication service of facilities accessed through or connected to it. The manufacturer will not

be responsible for any charges that result from such unauthorized use.

B. Incidence of Harm

If a telephone company determines that the equipment provided to customer is faulty and possibly

causing harm or interruption in service to the telephone network, it should disconnect telephone

service until repair can be done. A telephone company may temporarily disconnect service as long as

repair is not done.

C. Changes in Service

A local telephone company may make changes in its communications facilities or procedure. If these

changes could reasonably be expected to affect the use of the phones or compatibility with the

network, the telephone company is required to give advanced written notice to the user, allowing the

user to take appropriate steps to maintain telephone service.

D. Maintenance Limitations

Maintenance limitations on the phones must be performed only by the manufacturer or its authorized

agent. The user may not make any changes and/or repairs expect as specifically noted in this manual.

Therefore, note that unauthorized alternations or repair may affect the regulatory status of the system

and may void any remaining warranty.

1. INTRODUCTION

Содержание U8210








































































































































































































































Результаты поиска

Содержание U8210

Отзывы:

LG U8210, Руководство по обслуживанию, Страница: 5 / 231

Результаты поиска

Содержание U8210

Отзывы: