LG U8210 Скачать руководство пользователя страница 41

Страница: 41 / 231

3. TECHNICAL BRIEF

- 42 -

3.8 Subsystem(MSM6250)

3.8.1 ARM Microprocessor Subsystem

The MSM6250 device uses an embedded ARM926EJ-S microprocessor. This microprocessor,

through the system software, controls most of the functionality for the MSM, including control of the

external peripherals such as the keypad, LCD, RAM, and ROM devices. Through a QUALCOMM

proprietary serial bus interface (SBI) the ARM926EJ-S configures and controls the functionality of the

RTR6250, RFR6200, RFL6200, and PM6650 devices.

3.8.2 UMTS Subsystem

The UMTS Subsystem performs the digital UMTS signal processing. Its components include:

• Searcher engine

• Demodulating fingers

• Combining block

• Frame deinterleaver

• Viterbi decoder

• Up-link subsystem

• Turbo decoder

On the down-link channel the UMTS subsystem searches, demodulates, and decodes incoming

CPICH, CCPCH, SCH, and Traffic Channel information. It extracts packet data from the downlink

traffic channel and prepares the packet data for processing. For the up-link, the CDMA subsystem

processes the packet data and modulates the up-link traffic channel (DCH).

3.8.3 GSM Subsystem

The GSM Subsystem performs the digital GSM signal processing.

3.8.4 RF Interface

The RF interface communicates with the mobile station’s external RF and analog baseband circuits.

Signals to these circuits control signal gain in the Rx and Tx signal path and maintain The system’s

frequency reference.

3.8.5 Serial Bus Interface(SBI)

The MSM6250 device’s SBI is designed specifically to be a quick, low pin count control protocol for

QUALCOMM’s RTR6250, RFR6200, RFL6200, and PM6650 ASICs. Using the SBI, the RTR6250,

RFR6200, RFL6200, and PM6650 devices can be configured for different operating modes and for

minimum power consumption, extending battery life in Standby mode. The SBI also controls DC

baseband offset errors.

Содержание U8210








































































































































































































































Результаты поиска

Содержание U8210

Отзывы:

LG U8210, Руководство по обслуживанию, Страница: 41 / 231

Результаты поиска

Содержание U8210

Отзывы: