16
INSTALLATION INSTRUCTIONS
ENGLISH
Installer Setting -How to enter installer setting mode
CAUTION
Installer setting mode is to set the detail function of the remote controller.
If the installer setting mode is not set correctly, it can cause problems to the product, user
injury or property damage. This must be set by an certificated installer, and any installation or
change that is carried out by a non-certificated person should be responsible for the results.
In this case, free service cannot be provided.
!
With the FAN SPEED button pressed, press the RESET button.
1
By using the TEMPERATURE SETTING button, set function code and
setting value. (Please refer the Installer Setting Code Table.)
2
Press the ON/OFF button toward the indoor unit 1 time.
3
Reset the remote controller to use the general operation mode.
4
Refer to the Installer Setting Code Table on the next page.
Function Code
Setting Code
1,MFL67655412,영어 2017. 11. 9. 오전 11:23 페이지 16
