LG TCW2013CS1, Руководство пользователя, Страница: 26 / 156

26
PROGRAMMING MODE - SETUP MODE
PROGRAMMING MODE –SETUP MODE
Setup Mode (display)
You can change washer vend price, cycle time, and cycle parameters, etc.
Entering set up mode
- Coin type – Turn on/off toggle switch.
- Card type – Insert the service card.
- OPL type – 1) Push the Hot & Cold button at the same time.
2) Push the Warm button 3 times.
3) Push the Start button.
- Then, the washer displays
.
1. How to change regular price.
Enter setup mode.
You will see LqC1
Button Display
Press the Hot button.
Press the Warm or the Cold button until appears
in the display.
Press the
Start
button.
Press the Start button.
Display previous regular price.
Press Warm(+) or Cold(-) button to set the regular price.
(The vend price can be set from 0 to 9.95 in 0.05
increments.)
Press the
Start
button.
The machine sets up the regular price, then advances to
the next process automatically.
1. Continue to set up the next price.
2. Stop the change of setup value and go back to ready
mode.
• Coin type - Turn on/off toggle switch.
• Card type - Pull the service card.
• All types - Push the Hot button twice
NOTE
• Price setting varies by country
• Set your country from
mode (Refer
How to enter the
)
• After EEPT, reset your country (Default country is USA)