LG TCW2013CS1, Руководство пользователя, Страница: 22 / 156

22
PROGRAMMING MODE
How to enter Programming mode
You can enter programming mode only for Idle
state and pause state.
- Card Type
1) Insert service card.
2) Display will show
.
- Coin Type
1) Dissemble upper coin box key.
2) Take out the coin drop from the coin box.
3) Turn on/off the toggle switch at the back of
the coin box.
4) Display will show .
- All Types
1) Push the Hot & Cold button at the same
time.
2) Push the Warm button 3 times.
3) Push the Start button.
4) Display will show
.
How to use button
You can change Washer vend price, cycle time
and Cycle parameters, etc.
: You can check machine information or change setting on Program setup, collect information data,
Diagnostic test. There are two methods that you can enter programming mode.
PROGRAMMING MODE
- Card type -
Insert Debit Card
- OPL type -
Coin Box Key
- Coin type -
Coin Vault
Openings close
Press
Button
Description
Hot
Moves to upper level or
Comes back to Idle State
Warm
Moves to the mode in the same
level (+)
Cold
Moves to the modes in the same
level (-)
Start
Enters the selected mode
NOTE
• If you turn on the power without connecting meter case for the first time, the machine display
.
• When the machine is shipped from the factory,
it is set in the coin type.
You can change Card/
Coin type by button. (For more information refer to SETUP mode.)
• The machine will display PUSH for OPL type.
• Price setting varies by country
• Set your country from
mode (Refer
How to enter the
)
• After EEPT, reset your country (Default country is USA)