34
EN
Symptoms
Reason
Solution
Washing machine
will not operate
Control panel has powered off
due to inactivity.
•
This is normal. Press the
Power
button to turn the washing machine on.
Washing machine is
unplugged.
•
Make sure cord is plugged securely
into a working outlet.
Water supply is turned off.
•
Turn both hot and cold taps fully on.
Controls are not set properly.
•
Make sure the cycle was set correctly,
close the door and press the
Start/
Pause
button.
Door is open.
•
Close the door and make sure that
nothing is caught under the door
preventing it from closing completely.
Circuit breaker/fuse is tripped/
blown.
•
Check house circuit breakers/fuses.
Replace fuses or reset breaker. The
washing machine should be on a
dedicated branch circuit. The washing
machine will resume the cycle where it
stopped once power is restored.
Control needs to be reset.
•
Press the
Power
button, then reselect
the desired cycle and press the
Start/
Pause
button.
Start/Pause was not pressed
after a cycle was set.
•
Press the
Power
button then reselect
the desired cycle and press the
Start/
Pause
button. The washing machine
will shut off if the
Start/Pause
button is
not pressed within 60 minutes.
Extremely low water pressure.
•
Check another tap in the house to
make sure that household water
pressure is adequate.
Washing machine is too cold.
•
If the washing machine has been
exposed to temperatures below
freezing for an extended period of
time, allow it to warm up before
pressing the
Power
button.
Washing machine is heating
the water or making steam.
•
The washing machine drum may stop
operating temporarily during certain
cycles, while water is safely heated to
a set temperature.
