30
EN
4
Close the lid and then insert the lower part of
the filter into the wash drum and press down
then press the top part into position until you
hear a click sound.
Type 2
1
Push down on the release tab on the top of
the filter cover and pull forward.
2
Open the lid, remove the lint and then wash
out.
3
Close the lid and then insert the lower part of
the filter into the wash drum and press down
then press the top part into position until you
hear a click sound.
Caution on Freezing During
Winter
•
When frozen, the product does not operate
normally. Make sure to install the product
where it will not freeze during winter.
•
In case the product must be installed outside
on a porch or in other outdoor conditions, make
sure to check the following.
How to Keep the Product from
Freezing
•
After closing the tap, disconnect the cold
supply hose from the tap, and remove water
while keeping the hose facing downwards.
Supply
hose
How to Handle Freezing
•
When water supply problems occur, take the
following measures.
−
Turn off the tap, and thaw out the tap and
both connection areas of supply hose of the
product using a hot water cloth.
−
Take out supply hose and immerse in warm
water below 50–60 °C.
50‒60 °C
