29
EN
Cleaning the Water Inlet Filter
•
Turn off the supply taps to the machine if the
washing machine is to be left for any length of
time (e.g. holiday), especially if there is no floor
drain (gully) in the immediate vicinity.
•
’ ' error message will be displayed on the
control panel when water is not entering the
detergent drawer.
•
If water is very hard or contains traces of lime
deposit, the water inlet filter may become
clogged. It is therefore a good idea to clean it
occasionally.
1
Turn off the water tap and unscrew the water
supply hose.
2
Clean the filter using a hard bristle brush.
Cleaning the Lint Filter
(Optional)
The filter is an important part for an efficient
washing performance result, so it needs special
care from you. It is recommended that the filter
be cleaned regularly.
CAUTION
•
Do not drop the filter on the floor.
•
Be careful not to have your nails caught in the
filter when you handle the filter.
•
The lint filter should be back into its original
position after being washed to avoid damage
to your laundry items. Do not operate the
machine with the Lint filters removed.
Type 1
1
Push down on the release tab on the top of
the filter cover and pull forward.
2
Open the lid and remove the lint.
3
Wash the filter with a soft brush.
