background image

Congratulations on your purchase 

and welcome to the LG family. Your 

new LG Dryer combines the most 

advanced drying sensor technology 

with simple operation and high  

efficiency. By following the  

operating and care instructions  

in this manual, your dryer will  

provide you with many years of  

reliable service. 

THANK YOU!

INSTALLATION INSTRUCTIONS

Choose the Proper Location .................................. 9 
Clearances ............................................................. 9 
Installation With Optional  
Pedestal Base or Stacking Kit .............................. 10 
Leveling the Dryer ................................................ 11
Reversing the Door Swing .................................... 11 
Changing the Dryer Vent Location ....................... 12 
Venting the Dryer ............................................ 13, 14 
Connecting Electric Dryers ................................... 15
Final Installation Check  ....................................... 15
Flow Check (Duct condition test) ......................... 16

HOW TO USE

Sorting Loads .......................................................  17 
Loading the Dryer ................................................. 17
Check the Lint Filter Before Every Load ............... 17
Control Panel Features ......................................... 18 
Cycle Guide .......................................................... 19 
The LCD Display ............................................. 20, 21 
Operating the Dryer .............................................. 22 
Cycle Setting Buttons .......................................... 22 
Cycle Option Buttons  .................................... 23, 24 
Special Functions ................................................. 24 
Custom Program .................................................. 25 
Steam Functions ............................................ 25–27
Steam Cycle Guide .............................................. 27

TROUBLESHOOTING

Before Calling for Service ............................... 29–31

USER mAINTENANCE INSTRUCTIONS

Regular Cleaning .................................................. 28

OPTIONAL ACCESSORIES/ 

SPECIFICATIONS

Optional Accessories ........................................... 32 
Pedestal Installation ....................................... 33, 34
Stacking Kit Installation .................................. 35, 36 
Key Dimensions and Specifications ..................... 36

ImPORTANT SAFETY INSTRUCTIONS

Basic Safety Precautions ....................................... 3 
Grounding Instructions ........................................... 4 
Safety Instructions for Installation ...................... 4, 5 
Safety Instructions for Steam Functions ................ 5 
Safety Instructions for Connecting Electricity  ....... 6

PARTS AND FEATURES

Special Features ..................................................... 7 
Key Parts and Components ................................... 8

Содержание STEAM DRYERS TD-V1000S





































Отзывы: