LG STEAM DRYERS TD-V1000S Скачать руководство пользователя

Страница: 33 / 36

WARNING

To ensure safe and secure installation, please

thoroughly follow the instructions below.

PEDESTAL INSTALLATION

Tools Needed for Installation:

• Phillips-head screwdriver
• Wrench (supplied)

• Incorrect installation can cause serious

accidents.

•

The appliances are heavy. Two or more

people are required when installing the

pedestal.

There is a risk of serious back injury

or other injuries.

• Do not allow children to play in or on the

drawer.

There is a risk of suffocation or injury.

• Do not step on the handle.

There is a risk of

serious injury.

• If appliances are already installed,

disconnect them from all power, water, or

gas lines and from draining or venting

connections.

Failure to do so can result in

electrical shock, fire, explosion, or death.

• When installing, gloves must be put on.

The pedestal accessory includes:

• Drawer divider (1)

• Wrench (1)

• Screws (18) †

• Retainers (4) ††

Insert the T-clip of the 4 retainers into the
dryer base as shown. Press up on the
back of the clip and pull outward to lock
into place.

Retainer

To set the dryer to the same height as the
washer, fully retract the leveling feet of the
dryer by turning them counterclockwise, then
turn them clockwise 1-1/2 turns.

NOTE:

The appliance and pedestal assembly

must be placed on a solid, sturdy, level floor

for proper operation.

Retract fully

Then loosen

1-1/2 turns

T-clip

† Dryer installation only uses 8 screws
†† For dryer only

Содержание STEAM DRYERS TD-V1000S





































Результаты поиска

Содержание STEAM DRYERS TD-V1000S

Отзывы:

Похожие инструкции для STEAM DRYERS TD-V1000S

Бренды по названию

Популярные бренды

LG STEAM DRYERS TD-V1000S, Руководство пользователя и инструкции по установке

Результаты поиска

Содержание STEAM DRYERS TD-V1000S

Отзывы:

Похожие инструкции для STEAM DRYERS TD-V1000S

Бренды по названию

Популярные бренды