background image

4-1

OPERATING INSTRUCTIONS

FEATURES

CONTROL PANEL

Metal Tray

HIGH Rack

LOW Rack

Oven Front Plate

Safety Door Lock System

Window Door Screen

Door Frame

Control Panel

Choke Cover

Control Panel Deco.

1. Clock: 

You can set the time of day.

2. Convection: 

You can select temperature and time of convection.

3. Grill: 

You can select the grill categories.

4. Speed Combi: 

You can select the combination categories.

5. Speed Auto Cook: 

Speed auto cook allows you to cook most of

your favorite food quickly by selecting the food type and the weight

of the food.

6. Dial Knob:

• You can set cooking times, temperature, weight and cooking

categories.

• While cooking with auto and manual function, you can lengthen

or shorten the cooking time at any point by turning the dial

knob(except defrost mode).

7. Display Window: 

You can show time of day, cooking time, power

level and cooking categories.

8. Enter: 

You can determine the selected cooking category,

microwave power level or temperature.

9. Defrost: 

You can select the food type and the weight of the food.

10. Micro: 

You can select five power level settings.

11. Stop/Clear: 

You can stop over and clear all entries except time of

day.

12. Start/Quick Start:

• In order to start cooking which is selected, press button one  time.

• The quick start feature allows you to set 30 seconds intervals of HIGH

power cooking with a touch of the quick start button.

Содержание SolarDOM MP-9485S






































Отзывы: