LG RVF1000 Скачать руководство пользователя | Manualshive

Страница: 43 / 56

background image

Operation

43

4

Oper

ation

Muting the Active Microphone

Press

on the remote control. When the active microphone is muted in a call, the microphone symbol

changes to the muted

microphone

icon.

Managing Video Layout

During a call, video from the connected caller appears in your monitor. You can change the screen layout of near and far end video.

Understanding Screen Layouts

Typically, screen layouts appear as the following types:
• A far end participant or a presentation appears on the left window.
• Your site (the near end participant) appears on the right window.

Changing the Screen Layout

1. During a call, press

LAYOUT

button to display the layout select window.

2. Selects the screen layout using left

or right

button.

3. Press

OK

to confirm.

Sharing Content

During a call, you can share digital content.
1.   Connect the PC to the system with D-sub cable (see page 16).
2.   Let out the video out correctly on your PC (e.g. Fn(Function) + F7 or Dual monitor setting)
3.  Press

CONTENT

. The “Video source is changing...” message will be displayed on the screen. The PC screen is displayed on the near-end

video window.

4. If you press

CONTENT

again, it returens to the camera screen.

NOTE

This unit supports 640x480, 800x600, 1024x768 and 1280x768 resolutions for PC output resolutions.

Viewing Call Information

You can view the call information.
1. During a call, press

INFO

.

The current call information window is displayed on the screen.

• Call Protocol: Shows the call protocol.

• Resolution: Shows the resolution, in pixels, of the video image transmitted or received.

• Video Frame Rate: Shows the video frame rate in frames per second.

• Video/Audio Codec: Shows the Video/Audio codec used to compress and decompress the Video/Audio.

• Video Packet loss/Audio Packet loss: Shows the number of packets of data that fail to reach their destination. Packet loss can be caused

by a number of factors, including signal degradation over the network medium, oversaturated network links, corrupted packets rejected
in-transit, faulty networking hardware, maligned system drivers or network applications, or normal routing routines.

• Video/Audio jitter: Shows the variation, in milliseconds, in the time between packets arriving, caused by network congestion, timing

drift, or route changes.

• Video/Audio BW: Shows the amount of Video/Audio data transferred per second in kilobits.

• Cumulative: Shows the up to date count of packets lost in the call.

• Percentage: Shows packet loss as a percentage of the total packets sent.

«
...
41
42
43
44
45
...
»

Содержание RVF1000

























































Отзывы:

Нет отзывов

Похожие инструкции для RVF1000

Бренд: Ascon tecnologic Страницы: 4

Бренд: THOMSON Страницы: 81

Бренд: Rath Страницы: 10

Бренд: VAT Страницы: 53

Бренд: Shure Страницы: 18

Бренд: Polycom Страницы: 2

Stealthbox SB-F-150-SCDBL/12TW3

Бренд: JL Audio Страницы: 5

L-force CANopen EMF2178IB

Бренд: Lenze Страницы: 154

Бренд: Panasonic Страницы: 59

Бренд: Panasonic Страницы: 64

Бренд: Panasonic Страницы: 80

Бренд: Panasonic Страницы: 150

Бренд: Sony Страницы: 48

Бренд: Philips Страницы: 2

Бренд: Philips Страницы: 2

Бренд: Philips Страницы: 2

Бренд: Philips Страницы: 2

Бренд: Philips Страницы: 29

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды